For the first design drawing before making FRP relief, you can find some cases on the Internet. If it is not suitable, you can find a professional customized relief design company. The sculpture design company will design according to the design needs of the actual situation, and the effect drawings can be handed over to the manufacturer for relief design.

在確定浮雕設計方案后,要做的就是創(chuàng )建泥草案,它需要雕塑師,泥稿完成后浮雕是什么樣,所以這一步是非常重要的,泥稿生產也是一個再創(chuàng )造的過程,雕塑家誰能設計方案進行小的調整根據實際情況,目的是讓救援工作更加完 美。

After determining the relief design scheme, the first thing to do is to create the mud draft. It requires professional sculptors. What is the relief like after the mud draft is completed, so this step is very important. The mud draft production is also a process of re creation. Sculptors who can make small adjustments to the design scheme according to the actual situation, in order to make the rescue work more perfect.

泥稿制作完成后要進行模具生產、大規模定制救濟通常用石膏模具的選擇與石膏,石膏模具必須選擇使用滑石粉和其他雜質等更多的石膏模具制作,模具可能出現毀滅性破壞,需要風險,所以石膏必須謹慎的選擇。在石膏模具之前,需要救援,使容易完整的模具尺寸和完成運動和已故的過程中,一般使用塑料或紙上插入壓花泥漿草案分為幾塊,然后把石膏鑄草案泥混合物,如石膏凝固后和熱量,可以取下來的石膏模具這個過程需要小心,盡可能確保模具的完整性。然后將泥漿從模具中取出，根據需要將模具晾干。

After the completion of mud draft production, mold production and mass customization relief usually use gypsum mold selection and gypsum. Gypsum mold must be made with more gypsum molds such as talc powder and other impurities. The mold may have destructive damage and need risks, so the stone paste must be selected carefully. Before the gypsum mold, it needs to be rescued to make it easy to complete the mold size and complete the movement and dead process. Generally, the embossing mud draft is inserted on plastic or paper and divided into several pieces, and then the gypsum cast draft mud mixture, such as the gypsum after solidification and heat, can be removed from the gypsum mold. This process needs to be careful to ensure the integrity of the mold as much as possible. Then remove the slurry from the mold and dry the mold as needed.

模具制作好后，就可以制作玻璃鋼了。向樹脂中加入滑石粉，拌勻后加入促進劑和固化劑。然后你可以把糊狀樹脂倒入石膏模具中。注意樹脂的均勻厚度，在樹脂凝固前完成所有的工作。下一步需要切成小塊的玻璃絲綢與樹脂堅持的一層樹脂固化前,按一塊粘貼,這樣整個玻璃絲綢布浸泡在樹脂,一般情況需要堅持3-4層的布,所以強度和韌性。

After the mold is made, FRP can be made. Add talc powder to the resin, mix well, and then add accelerator and curing agent. Then you can pour the paste resin into the plaster mold. Pay attention to the uniform thickness of the resin and complete all work before the resin solidifies. In the next step, the glass silk needs to be cut into small pieces and pasted with a layer of resin before curing. In this way, the whole glass silk cloth is soaked in resin. Generally, it needs to adhere to 3-4 layers of cloth, so it has strength and toughness.

當玻璃鋼完全固化后，可以將玻璃鋼從模具中取出，石膏模具被卡住的地方可以被打破。移除的玻璃鋼需要修補和打磨，拼接需要完成。就要給玻璃鋼著色了，以仿銅為例，可以用丙烯顏料進行繪圖，深地色，在凸出處加上金屬銅色，也可以用油漆、銅粉等其他材質進行著色。

When the FRP is fully cured, the FRP can be removed from the mold, and the stuck part of the gypsum mold can be broken. The removed FRP needs to be repaired and polished, and the splicing needs to be completed. Glass fiber reinforced plastics are about to be colored. Taking imitation copper as an example, propylene pigment can be used for drawing, deep ground color, metal copper color can be added at the protrusion, or paint, copper powder and other materials can be used for coloring.

浮雕的安裝,需要的施工人員,一般要求錢在墻上在膨脹螺釘將固定在墻上的玻璃鋼救援,縫合和螺釘孔位置修復著色,所以玻璃鋼救援工作就完成了。

The installation of relief requires professional construction personnel. Generally, money is required on the wall. The expansion screw will fix the FRP rescue on the wall, and repair and coloring the position of suture and screw hole. Therefore, the FRP rescue work is completed.

以上就是有關山東浮雕雕塑廠家的相關知識，如果還想了解更多，歡迎前來咨詢，我們樂(lè )意為您解答。

The above is the relevant knowledge about Shandong relief sculpture manufacturers. If you want to know more, welcome to consult. We are happy to answer for you.